Eris E8 XT
- 8-inch woven composite low-frequency transducer
- 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 105 dB maximum continuous SPL
AED1,149
Guaranteed Safe Checkout
Features & Compatibility
The best in UAE
The familiar woven composite low-frequency driver offers Eris’ signature tight, clear bass, plenty of punch, and no flab. Eris E8 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 35 Hz. That’s 10 Hz below previous models—with no subwoofer!
Technical Specifications
Inputs |
|
|---|---|
| 1- Balanced XLR | |
| 1- Balanced ¼” TRS | |
| 1- Unbalanced RCA |
Performance |
|
|---|---|
| Frequency Response | 35 Hz – 20 kHz |
| Crossover Frequency | 2.2 kHz |
| LF Amplifier Power | 75W |
| HF Amplifier Power | 65W |
| Peak SPL (@ 1 meter) | 105 dB |
| LF Driver | 8” reinforced woofer |
| HF Driver | 1.25” silk dome tweeter |
| Input Impedance | 10 kΩ |
| Dispersion | 100 degrees horizontal by 60 degrees vertical |
User Controls |
|
|---|---|
| Volume Range | A-type taper |
| MF Control | -6, 0, +6 dB |
| HF Control | -6, 0, +6 dB |
| Low Cut | Flat, 80 Hz, 100 Hz |
| Acoustic Space | Flat, -2 dB, -4 dB |
Protection |
|
|---|---|
| RF interference | |
| Output-current limiting | |
| Over-temperature | |
| Turn-on/off transient | |
| Subsonic filter | |
| External mains fuse |
Power |
|
|---|---|
| 100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet |
|
|---|---|
| Vinyl-laminated, medium-density fiberboard |
Physical |
|
|---|---|
| Width | 9.75” (247.65 mm) |
| Depth | 11.5” (292.1 mm) |
| Height | 16” (406.4 mm) |
| Weight | 23 lbs (10.43 kg) |
Additional information
| Brand |
|---|
Customer Reviews
Related Products
Eris E7 XT
- 6.5-inch woven composite low-frequency transducer
- 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 104 dB maximum continuous SPL
Temblor T10
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert
- Ground-lift switch
Reviews
There are no reviews yet.