Eris E3.5
- 3.5-inch (89 mm), woven composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Rear-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
AED499
Guaranteed Safe Checkout
Features & Compatibility
The best in UAE
The Eris E3.5 is equipped with a one-inch silk-dome tweeter that produces a smooth and refined sound, accurately reproducing transients and high frequencies. The tweeter is designed to radiate sound with a fairly wide dispersion pattern, creating a large optimal listening area or “sweet spot” so you can move around and still hear everything accurately.
Technical Specifications
Inputs |
|
|---|---|
| 1- Stereo 1/8″ | |
| 2- Balanced ¼” TRS | |
| 2- Unbalanced RCA |
Performance |
|
|---|---|
| Frequency Response | 80 Hz – 20 kHz |
| Crossover Frequency | 2.8 kHz |
| Amplifier Power | 25W/speaker |
| LF Driver | 3.5″ |
| HF Driver | 1” silk dome |
| Peak SPL (@ 1 meter) | 100 dB |
| Input Impedance | 10 kΩ |
User Controls |
|
|---|---|
| Volume Range | A-type taper |
| MF Control | Variable (-6 to +6 dB, center 100 Hz) |
| HF Control | Variable (-6 to +6 dB, center 10 kHz) |
Protection |
|
|---|---|
| RF interference | |
| Output-current limiting | |
| Over-temperature | |
| Turn-on/off transient | |
| Subsonic filter | |
| External mains fuse |
Power |
|
|---|---|
| 100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet |
|
|---|---|
| Vinyl-laminated, medium-density fiberboard |
Physical |
|
|---|---|
| Width | 5.6″ (141 mm) |
| Depth | 6.4″ (162 mm) |
| Height | 8.3″ (210 mm) |
| Weight (per pair) | 6.4 lb. (2.9 kg) |
Additional information
| Brand |
|---|
Customer Reviews
Related Products
Eris E8 XT
- 8-inch woven composite low-frequency transducer
- 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 105 dB maximum continuous SPL
Temblor T10
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert
- Ground-lift switch
Reviews
There are no reviews yet.