Eris Sub8
- 8-inch, front-firing, paper-composite low-frequency transducer with high-elasticity rubber surround
- Class AB amplifier: 100W peak (50W RMS) power
- Studio One Prime and Studio Magic Software Suite ($1,000 value!)
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
- Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
- Left and right, balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
- Polarity invert switch
- Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter, external mains fuse
AED899
Guaranteed Safe Checkout
Features & Compatibility
The best in UAE
The Eris® Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. We called it Eris because it’s been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics. Of course, they’ll play nice with other monitors, too, but if you’ve got a pair of Eris in your home or studio already, the Eris Sub8 is the single best subwoofer you can get to put a little boom in your room.
Technical Specifications
Inputs |
|
|---|---|
| 2- Balanced ¼” TRS
2- Unbalanced RCA |
Outputs |
|
|---|---|
| 2- Balanced ¼” TRS (full range with 80 Hz HPF option)
2- Unbalanced RCA (full range with 80 Hz HPF option) |
Performance |
|
|---|---|
| Frequency Response | 30 Hz – 200 Hz |
| Low Pass Filter Frequency | 50 – 130 Hz (variable) |
| Signal-to-Noise Ratio | >95 dB (A weighted) |
| THD | 0.05% |
| Amplifier Power | 100W peak, 50W RMS |
| Power Consumption | 100W |
| Amplifier Type | Class AB |
| Peak SPL at 1m | 113 dB |
| Woofer | 8” paper-composite with high-elasticity rubber surround, front-firing |
| Acoustic Port | Front-firing bass reflex |
User Controls |
|
|---|---|
| Input Gain Range | -30 to +6 dB |
| Polarity Switch | 0° or 180° |
| Low Pass Filter Control | 50 Hz to 130 Hz |
| High Pass Filter Switch | On/Off |
Protection |
|
|---|---|
| RF interference
Output-current limiting Over-temperature Turn-on/off transient Subsonic filter External mains fuse |
Power |
|
|---|---|
| 100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet |
|
|---|---|
| Vinyl-laminated MDF |
Physical |
|
|---|---|
| Width | 9.8” (250 mm) |
| Depth | 12.75” (324 mm) |
| Height | 11.6” (295 mm) |
| Weight | 16.3 lbs (7.4 kg) |
Additional information
| Brand |
|---|
Customer Reviews
Related Products
Eris E8 XT
- 8-inch woven composite low-frequency transducer
- 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 105 dB maximum continuous SPL
Temblor T10
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert
- Ground-lift switch
Reviews
There are no reviews yet.