Temblor T8
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- Polarity invert
AED1,399
Guaranteed Safe Checkout
Features & Compatibility
The best in UAE
Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the most accurate possible response. The Temblor T8 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.
Technical Specifications
Inputs |
|
|---|---|
| 2- Balanced ¼” TRS
2- Unbalanced RCA |
Outputs |
|
|---|---|
| 2- Balanced ¼” TRS (full range with 80 Hz HPF option
2- Unbalanced RCA (full range with 80 Hz HPF option) |
Performance |
|
|---|---|
| Frequency Response | 30 Hz – 200 Hz |
| Low Pass Filter Frequency | 50 – 130 Hz (variable) |
| Signal-to-Noise Ratio | >98 dB (A weighted) |
| THD | 0.05% |
| Amplifier Power | 200W peak, 100W RMS |
| Power Consumption | 120W |
| Amplifier Type | Class AB |
| Peak SPL at 1m | 104 dB |
| Woofer | 8” glass-composite, downward-firing |
| Acoustic Port | Front-firing bass reflex (round) |
User Controls |
|
|---|---|
| Input Gain Range | -30 to +6 dB |
| Polarity Switch | 0° or 180° |
| Low Pass Filter Control | 50 Hz to 130 Hz |
| High Pass Filter Switch | On/Off |
Protection |
|
|---|---|
| RF interference
Output-current limiting Over-temperature Turn-on/off transient Subsonic filter External mains fuse |
Power |
|
|---|---|
| 100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet |
|
|---|---|
| Vinyl-laminated MDF |
Physical |
|
|---|---|
| Width | 10.2” (260 mm) |
| Depth | 12.6” (320 mm) |
| Height | 11” (280 mm) |
| Weight | 21.2 lbs (9.6 kg) |
Additional information
| Brand |
|---|
Customer Reviews
Related Products
Eris E7 XT
- 6.5-inch woven composite low-frequency transducer
- 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 104 dB maximum continuous SPL
Reviews
There are no reviews yet.